|
* The theoretical spreading rates shown above make no allowance for surface profile, uneven application, over spray, losses in containers and equipment.
Due allowance should be made as appropriate when estimating practical spreading rates.
** Ensure primer is fully dried out before wrapping.
SURFACE PREPARATION:
Should be applied to dry steel surfaces, cleaned free from dust, dirt, grease and other contaminants.
The Substrate must not be less than 30C above dew point.
HEALTH & SAFETY PRECAUTIONS:
1. Take normal precautions to avoid skin contact and inhalation of spray mist.
2. Provide adequate ventilation.
3. Contact with skin - Wash thoroughly with a suitable industrial cleanser or with lukewarm water and soap.
Eye contamination - Flush with water for 10 minutes and seek medical attention at once.
4. Observe Health & Safety instructions on containers and Product Safety Data Sheets.
5. For fuller details consult Pollyaim Ltd.
The information detailed in this Data Sheet is subject to modification from time to time in light of experience and or product development. Before using, customers are advised to check with Pollyaim Ltd., quoting the reference number.
All figures were indicative when Data Sheet went to press.
|
.gif)
