Front Page Banner

Shall we suggest?

Category: Fire Suppression System > CO2 Suppression Component >

CO2 K Valve
send enquiry

  • Material: Brass CZ122
  • Test Pressure: 250Bar
  • Burst Disc pressure: 200-250Bar
  • Pneumatic actuation pressure: 1.5 Bar

 

 
Pilot Cylinder Solenoid Actuated
send enquiry

Pilot Cylinder Solenoid Actuated


 

 
CO2 Multijet Discharge Nozzles
send enquiry

Discharge nozzle with horn type is used for diffusing CO2 gas to prevent scattering of burning material.
Nozzle material : Brass CZ 121
Horn material : Aluminium alloy

CO2 nozzles in total flooding system should be arrange in the protected space in a manner to ensure equal distribution of CO2 gas during a discharge.


 

 
Pressure Operated Directional Valves
send enquiry

When Two or more areas are to be protected using a same bank of CO2 cylinders, a Pressure Operated Directional (POD) valves is installed in each of the CO2 main feed pipe leading to the designated areas. CO2 gas from pilot cylinders connected to the inlet port will open valve.


 

 
Discharge Hose and Pilot Loop Hose
send enquiry

  • Specification: SAE 100R1AT
  • Min. Burst Pressure 8000Psi (1/2"), 11000Psi (1/4")
  • Test Pressure: 3000Psi
  • Min. Bend Radius: 100mm

 

 
Fire Curtains
send enquiry

Actuated by 24VDC tripping device. Install on top of louvers
or opening.


 

 
Manifold Pressure Switch
send enquiry

Manifold Pressure Switch


 

 
CO2 Cylinder 68L
send enquiry

CO2 Cylinder 68L

  • Test Pressure: 250Bar
  • Empty Weight: 75Kg
  • Finishing: Red
  • CO2 Capacity: 45Kg
  • Manufacture to: BS5045 Part 1
  • Material: Mn Steel Thread 28.8 x 14" TPI
  • Filling Ratio: 0.667
  • Develop Pressure:
    50Bar (725Psi) @ 15c
    60Bar (870Psi) @ 30c
    170Bar (2465Psi) @ 60c

 

 
Page : | 1 |